A quick drying, one pack primer. Interprime 198 is surface tolerant, compatible with most substrates and can be overcoated with a wide range of finishes.
Intended uses: For the maintenance above water areas. Approved for the carriage of grain when used as part of an approved scheme.
For use at maintenance & repair or on board maintenance.
This material is a one pack coating.
Product Chemistry
Alkyd
Volume Solids
41%
VOC content (EPA method)
506 g/lt
Maximum Dry film thickness
3 mil
Minimum Dry film thickness
2 mil
Number of components
Single Pack
Dry time (at 59°F)
3 Hours
Low Temperature Cure (at 41°F)
8 Hours
Finishing / sheen: Matt
