3M PPS PAINT PREPARATION SYSTEM

 
 
 
 
Part No Description Unit Price Quantity
3MC16000 3M Lid & Liner Ea $ 3.38
Details
  • Designed for use with 3M™ PPS™ (Legacy) paint preparation system
  • Kits contain disposable lids with micron filters, liners and sealing plugs
  • Stock PPS™ Lids & Liners efficiently and cost-effectively
  • Available for PPS™ Cups & Collars in five sizes (90mL – 850mL; 3 fl oz - 28 fl oz) for jobs ranging from spot repairs to 4-panel repairs
  • PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of paint materials
  • System enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down)
  • Reduces the chance of outside contamination, delivers consistent material transfer and helps reduce paint consumption
  • PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by as much as 50% compared with conventional paint cup systems
  • Sealing plugs allow for temporary sealing and protection of non-catalyzed paint materials

3M™ PPS™ Lid & Liner Kits contain 25 disposable lids (Large size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ (Legacy) paint preparation system. Kits are available in five sizes for a range of jobs large and small.

 

PPS Cup & Collar
Lids and liners are sized specifically for the range of 3M™ PPS™ Cups & Collars
Kits for Added Efficiency with 3M™ PPS™
Excellent for efficiently stocking PPS™ lids, liners and related components, 3M™ PPS™ Lid & Liner Kits contain disposable lids, disposable liners, and sealing plugs specifically for use with the 3M™ PPS™ (Legacy) paint preparation system. Each PPS lid features a welded-in filter which effectively strains paint material during application. Choose lids with 125 micron filters, which are often recommended for waterborne paint materials; or 200 micron filters for traditional solvent-based paint materials. Always reference your paint manufacturer to ensure the recommended filter to strain the material.

Lids and liners are sized specifically for the range of 3M™ PPS™ Cups & Collars, allowing technicians to mix up to 28 fluid oz (850 mL). Correct mixes are best achieved when also using with a 3M™ PPS™ Mix Ratio Insert, or a weight scale. Mix ratio film inserts are sold separately. Lid and liner sizes include:
 
3M™ PPS™ UV Standard Lid & Liner Kits are also available, featuring PPS™ lids, liners and sealing plugs in black instead of transparent to keep out UV light. These kits are recommended for use when applying UV light curing materials such as primer, sealer, base-coat and clear coats.

Advantages of the 3M™ PPS™ System
Unlike conventional paint cup systems, our 3M™ PPS™ (PDF, 706.8 Kb) eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™ Cup. Then simply mix the paint in the PPS™ disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™ System. With just these few simple steps, you're ready to start spraying.

Your Spray Gun Functions at any Angle, Even Upside Down
PPS™ allows the painter to spray consistently 90° to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.
  
An all-in-one system for spray coatings
3M™ Accuspray™ ONE spray gun with PPS™

Clean Up is a Breeze and Uses Less Solvent
After spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™ adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings. Most guns can be cleaned with less than 3 oz. of solvent.

A Versatile System that Works with Most Spray Guns
Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun (PDF, 310.0 Kb). Painters have also the option to use the 3M™ Accuspray™ ONE spray gun. which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.

Reduces the Chance of Contamination Between Jobs
Because the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%.

The Bottom Line: Why 3M™ PPS™ is the Paint & Coatings Spray System of Choice
3M™ PPS™ is an all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%. You'll find that technicians operate with greater efficiency and spend less time on cleaning tasks. 3M PPS offers many advantages for any one spraying liquid coatings from a spray gun with cup.

 

Specifications
Application
Manual Spray Coating, Paint Application, Paint Finishing, Paint Preparation
Brand
PPS™
Case Quantity
1 per Case
Color Family
Multi-color
Container Volume
117 ml, 400 ml, 650 ml, 840 ml, 850 ml, 88.72 ml, 90 ml
Cup Size
Large, Micro, Midi, Mini, Standard
Filter Micron Rating
125 μm, 200 μm
Filter Size
125 Micron, 200 Micron
National Stock Number
4940015251234
Packaged Form
Boxed
Product Color
Transparent
Product Type
Large Kit, Micro Kit, Midi Kit, Mini Kit, Standard Kit
TDS Required
Yes
Volume (Imperial)
13.5 fl oz, 22 fl oz, 28 fl oz, 3 fl oz, 6 fl oz
Volume (Metric)
180 mL, 400 mL, 650 mL, 850 mL, 90 mL